BIRO MODEL BCC-100 POULTRY CUTTER

A variety of products (chicken, duck, fish, rabbit, etc.) can be cut-up on the BIRO Model BCC-100 Poultry Processing Machine. The special 9″ diameter (23cm) smooth beveled knife blade can produce clean cuts without skin tearing. There is no cutting loss and minimal product shrinkage.

The 3/4 horsepower totally enclosed motor gives the operator all the power required to maintain maximum productivity. A stainless steel 3/4 HP motor is available as an option for harsh wash-down environments. Left hand machines are available if production flow requires a left hand unit. See other options on the reverse side.

SPECIFICATIONS

CONSTRUCTION:  STAINLESS STEEL BASE, COLUMN, EXTENSION SHAFT.

MOTORS

MOTORS VOLTS CYCLE PH AMPS STATUS
3/4 HP (.5 kw)-TE 115/230 60 1 9.0/4.5 STD
3/4 HP (.5 kw)-TE 110/220 50 1 10.6-5.3 EC
3/4 HP (.5 kw)-TE 208-230/460 60 3 2.8-2.9/1.45 EC
3/4 HP (.5 kw)-TE 380 50 3 1.8 EC
3/4 HP (.5 kw)-TE/SS 115/230 60 1 7.6/3.8 EC

EC = EXTRA COST  STD = STANDARD   TE = TOTALLY ENCLOSED
SS = STAINLESS STEEL

STANDARD FEATURES

7.5’ CORD AND 3 PRONG PLUG ON 115 VOLT, 7.5’ CORD NO PLUG ON 208-230/460 VOLT, PRODUCT GUIDE TROUGH, OPERATING AND SAFETY MANUAL.

SWITCH

TILT TYPE, ENCLOSED, WATERPROOF.

INTERLOCK SWITCH

MICRO TYPE, ENCLOSED, WATERPROOF.

KNIFE BLADE

STAINLESS STEEL, 9” (228 MM) DIAMETER, BEVEL.

CUTTING GUIDE BAR

APEX TYPE, STAINLESS STEEL 1” (25 MM) DIAMETER.

PRODUCT GUIDE TROUGH

STAINLESS STEEL, STANDARD.

OPTIONS (EC)

LEFT HAND UNIT (BLADE ON LEFT SIDE OF MOTOR), SERRATED KNIFE BLADE (IN PLACE OF STANDARD KNIFE BLADE), CALIFORNIA STATE REQUIREMENT, STAINLESS STEEL 60 CYCLE, 1 PHASE MOTOR, SEE MOTOR SECTION ABOVE.

COUNTER SPACE REQUIRED 18” (457 MM) L X 18-1/2” (470 MM) W X 22” (559 MM) H.

CERTIFICATION U.S.D.A.

WEIGHT NOT PACKED: 70 LBS. (31.8 KG) APPROXIMATE. CARTON: 83 LBS. (37.6 KG) APPROXIMATE.

DIMENSIONS CARTON

L = 24” (610 MM) W = 21” (533 MM) H = 22” (559 MM).

Call us today at 800-234-2744 or 216-651-2933.